The Ghost Immobiliser
Immobilisers are a powerful weapon in the fight against vehicle theft. They stop the vehicle from starting if it isn't equipped with an identification card. They also work well to stop hotwiring or traditional methods of vehicle theft. However, more modern methods such as key cloning and relay theft are becoming more widespread.
The Ghost Immobiliser was designed to counter these trends and make your car unnoticeable. It doesn't use LED indications, radio signals or key fobs and is silent and discreet.
Easy to install
The Ghost Immobiliser, a revolutionary device, connects to the CAN data network of your vehicle in order to prevent key cloning or theft. It is an TASSA approved product, and is recognized by insurance companies. It is almost undetectable by thieves and operates in silence. It uses buttons on your steering wheel, center console, and doors to create an unique pin code that must be entered prior to being able to start your car. You can create up to 20 different sequences to increase security. The system is easy to install and doesn't require any additional hardware.
It is recommended to choose a reputable CAN immobiliser installer that specialises in your particular vehicle model to get the best results. Ideally, they will have a workshop near you where you can visit to complete your installation. You will also find a range of tools and equipment that can assist you in the installation. They will provide basic hand tools, multimeters insulation tape, and heat shrink tubing to safeguard the connections. A user's manual will offer specific instructions for the wiring of your vehicle.
Before starting the installation remove the battery from the circuit to avoid short circuits and airbag deployment. what is ghost immobiliser -checking the CAN L and H wires is vital since a misidentification could lead to improper integration of the system. It is also a great idea to label or mark the wires. Also, use a multimeter to verify that the power source you have identified has a reliable 12V supply.
Advanced thieves can employ different methods to bypass the Ghost Immobiliser, which includes blocking and spoofing signals. These methods are based on amplifying signals from the key fob to your vehicle's electronic controller unit. With advanced anti-jamming technologies and constant monitoring your vehicle, it can be protected from these sophisticated attacks.
Security enhancing
A ghost immobiliser provides an additional layer of protection to your vehicle from theft. It uses an PIN security system that you can enter via buttons on your steering wheel or dashboard making it difficult for thieves to take your vehicle. The device is also designed to be hidden inside the vehicle, and is devoid of lights or other indicators that could signal a potential criminal to its presence. It communicates with your car's ECU on the data bus, meaning it isn't vulnerable to the same hacking or relay attacks that can cripple conventional security systems.
It's a great investment for those who have high-end automobiles that are at a higher risk of theft because of their value and the popularity of their vehicles. Its enhanced security features protect against key copying, ECU swapping, and other threats to your car's security. Some ghost immobilisers can also be linked to an app, so that you can easily arm and disarm them. They can also be equipped with a service/valet mode that permits you to temporarily disable them while your vehicle is being serviced or repaired.
Another advantage of a ghost immobiliser is that it doesn't require any wire cutting. This is a fantastic option, particularly if your car is newer and doesn't come with an immobiliser. Certain systems can also be integrated with GPS tracking devices, which can provide an additional layer of security to your car. what is ghost immobiliser of a GPS tracker can also help you reduce the cost of insurance. If you opt to purchase a ghost immobiliser be sure it is TASSA verified and a professional installer installs it for you.
Compatible with all major brands and models
The Ghost Immobiliser has been designed to be compatible with all major brands and models of vehicles that will protect your pride and joy against theft. It creates a unique pin code using buttons on your steering wheel, console or door panels. You must enter this code before you are able to drive. It is tamper-proof, undetectable, and is covered by a three-year warranty. It is also fully approved by insurance companies. This means you can reduce your costs.
In contrast to standard immobilisers that make use of your key fob to control the car's ignition however, the Ghost system works by connecting directly with the engine controller unit through the CAN data bus. This means it is tamper proof, virtually impossible to disable or remove and is not targeted by organized car theft gangs. In addition it is possible to use the Ghost system can be paired with a secure iPhone application that permits remote management and monitoring.
You can design a PIN that is easy to remember, but mathematically unattainable to thieves. The PIN can be personalized and changed at any time, so you can ensure your vehicle is secure even if you park it on the street or in a parking lot. You can also select valet or service mode if you need someone else to drive your vehicle for a short period, such as when it is in the garage. This feature will also help prevent your vehicle from being stolen by a shady mechanic. You can choose the Ghost Call alert to give you additional security. It will inform you when your car is moving or has been moved.
Convenience
The ghost immobiliser is a highly effective security device that protects your vehicle against common methods of theft such as key cloning and relay attacks. It works by connecting to the car's CAN data network and blocking communication with the engine ECU. This makes it very difficult for thieves to hack or clone your vehicle.
Once installed, you'll have to enter a PIN up to 20 digits long using the buttons on the dashboard and steering wheel to begin the vehicle. The system is completely concealed and undetectable to thieves, because it does not emit any radio frequency signals. It is also able to be configured to allow an individual-changeable PIN code which further enhances its security. The system is also designed to prevent cutting the circuit which makes it nearly impossible to tamper with.
If you do have a problem remembering your PIN, there are systems that let you communicate with the immobiliser using an app on your phone, disarming it instantly. Some systems even have a valet/service setting that allows you to temporarily to start your car, for example when you drop it off at Valet Park or a garage.
The Ghost Immobiliser is also undetectable by thieves, as it doesn't transmit radio signals. This is an important advantage compared to other security products that are available from the aftermarket. It is also simple to use, and doesn't require complex wiring. It can also be used together with a dash cam for added safety. Dash cam Thinkware F70 features clear and crisp 1080p HD footage Format Free Technology, and parking mode. The system can be wired to ensure maximum performance and durability.
Installation
It is essential to select the most effective immobiliser ghost to shield your vehicle from thieves. This device can stop car thefts by preventing the communication between key fobs and the engine controller unit. This prevents thieves from intercepting the signal and copying your key fob in order to start your car. It can also detect any time it has been tampered with and alert the owner of the vehicle.
The device is easy to install and can be integrated with the existing systems in your vehicle. It doesn't require any modifications to vehicle wiring and can be placed in a concealed location like under the dashboard. To ensure that the device is correctly installed, follow the instructions in the user manual. After installation, it's crucial to test the system. This will ensure the ghost of the immobiliser functions as intended.
You can purchase an Autowatch Ghost 2 immobiliser and have it installed by a reputable installer. The installer will connect Ghost to your vehicle's CAN Bus system, making it harder for thieves to take over the system or bypass it. Installation typically takes between 2 and 3 hours.
When installing the Ghost it is recommended that you look up the wiring diagram for your vehicle model. This will help you find the CAN High and Low wires. Low wires needed to connect your Ghost to the engine of your vehicle. Check all connections to make sure they're secure and insulated.
After the installation is completed, you can begin using the Ghost Immobiliser as normal. It will turn off the ignition of your vehicle if you do not start it using the correct PIN, which you will need to enter yourself. The immobiliser ghost cost can also be put into service/valet mode when you have to surrender your vehicle to service or valet parking.